About Us

ZMC-1165/1380/1580/2080

● The main shaft gearbox achieves a larger speed range and torque through two-speed mechanical shifting. The internal gears of the gearbox adopt Taiwan's 5th grade precision cylindrical gear transmission, which has smooth transmission, low noise, impact load resistance and very high transmission stiffness. ability. The reduction ratios of the low-speed gear and high-speed gear of the gearbox are: 1:3.11 and 1:1.02 respectively.

● The machine tool is equipped with a constant-temperature oil cooler as standard: 1. To prevent the temperature of the bearings and gears from rising too high during operation. The constant-temperature oil cooler can be adjusted according to the climate in different areas to ensure the working accuracy of the machine tool and normal operation at each room temperature; 2. Fully lubricate the bearings and gears, reduce wear and noise, and extend service life.

● Double spiral

● Spindle box balance: nitrogen balancing cylinder

VMC-1370L/1380L/1580L

● The bed adopts a high-rigidity structural design, high-strength cast iron, and a closed frame structure, which has stronger load-bearing capacity, more stable equipment, and more durable precision.

● The use of herringbone structure columns significantly enhances the machine tool's rigidity and cutting stability. Suitable for powerful milling, with improved load capacity and no problems such as table overhang.

● The spindle adopts the spindle produced by Taiwan's first-tier brand manufacturer, which has strong cutting force. It is driven by a synchronous toothed belt, which is not easy to slip and can greatly reduce transmission noise and heat generation.

● The transmission screws are all made of Taiwan's Shangyin brand. The screws are supported by fixed supports at both ends and are pre-stretched to improve the rigidity of the screw drive.

● Each axis adopts an integrated design of the screw nut seat and the body, which greatly enhances the rigidity of the feed axis and ensures accuracy under the impact of heavy cutting acceleration.

● The column (hard rail) guide rail pair is quenched and plastic-coated, so that the equipment has a large load capacity and good cutting movement stiffness, and reduces dynamic and static friction characteristics, thereby improving the equipment's movement accuracy, rigidity, reliability and stability.

●Double spiral

● Spindle box balance: 1380L/1580L nitrogen balance cylinder

ZX-1500/ZX-4800/ZX-7000 CNC blind hol...

The ZX-1500 CNC blind hole special machine is specially designed for blind hole processing of petroleum perforating guns. It is suitable for processing the perforating gun diameter range φ51mm-φ89mm, and the maximum workpiece length is 1220mm.

The ZX-7000 CNC blind hole special machine adopts a mobile column type and is specially designed for blind hole processing of petroleum perforating guns. It is suitable for processing the perforating gun diameter range φ51mm-φ178mm, and the maximum workpiece length is 6400mm.

ZKV-2065/2565/3065

● The main shaft gearbox achieves a large speed range and torque through two-speed mechanical shifting. The internal gears of the gearbox adopt Taiwan's 5th grade precision cylindrical gear transmission, which has smooth transmission, low noise, impact load resistance and very high transmission stiffness. ability. The reduction ratios of the low-speed gear and high-speed gear of the gearbox are: 1:3.11 and 1:1.02 respectively.

● The machine tool is equipped with a constant-temperature oil cooler as standard: 1. To prevent the temperature of the bearings and gears from rising too high during operation. The constant-temperature oil cooler can be adjusted according to the climate in different areas to ensure the working accuracy of the machine tool and normal operation at each room temperature; 2. Fully lubricate the bearings and gears, reduce wear and noise, and extend service life.

● Double screw + chain chip conveyor

● Spindle box balance: nitrogen balancing cylinder

WKX-6020 CNC horizontal keyway millin...

WKX-6020 CNC horizontal keyway milling machine is a special equipment for keyway processing in petroleum perforating guns. It adopts 6 stations to realize automatic tool setting and automatic processing. It is suitable for processing perforating gun diameter range φ73mm-φ102mm, and the longest workpiece length is 1220mm.